Star tracer: black output file

Discussion forum for Tawbaware's Star Tracer and Image Stacker software
Post Reply
Fortuna
Posts: 5
Joined: Tue Aug 02, 2011 10:29 am

Star tracer: black output file

Post by Fortuna » Mon Jun 11, 2012 10:53 am

Hi,

I'm not a first time user and it usually used to work perfectly fine....

However, if I run the process to create an optimized output file, only a black tif or jpg is produced.

Any idea why this is happening?

Win XP Prof

Thanks,
Fortuna

maxlyons
Posts: 3649
Joined: Fri Jun 20, 2003 8:55 pm
Location: USA
Contact:

Re: Star tracer: black output file

Post by maxlyons » Tue Jun 12, 2012 7:17 am

Fortuna wrote:Any idea why this is happening?
No...not without more information. One possibility is that the optimized results aren't good (possibly due to bad input data), but that is just a guess. Can you post the contents of your project file?

Thanks,

Max

Fortuna
Posts: 5
Joined: Tue Aug 02, 2011 10:29 am

Re: Star tracer: black output file

Post by Fortuna » Fri Jun 15, 2012 8:57 am

Hi Max,

okay, I will try to draw more lines in the meantime.

Do you mean this?

# Project file created by StarTracer 0.1.1.0
# Created 11.06.2012 16:55:16
#-RotateAmount1 30
#-RotateCount1 1
#-RotateAmount2 -30
#-RotateCount2 1


p n"TIFF c:LZW"

#-imgfile 5616 3744 "G:\Fotos fuer SAGA\startrails\namibia\output\mesosaurus4.tif"
o w5616 h3744 f0 y0 p102.249774 r-78.718748 v94.43 a0 b544108090885.17 c0 d0 e0 n"G:\Fotos fuer SAGA\startrails\namibia\output\mesosaurus4.tif"
r i0 m0 x4 y2949 x33 y2959 x36 y2940 x30 y2924 x33 y2906 x32 y2889 x45 y2867 x78 y2803 x159 y2808 x133 y2865 x189 y2883 x200 y2912 x214 y2920 x260 y2917 x279 y2932 x369 y2906 x403 y2889 x424 y2871 x448 y2883 x489 y2877 x505 y2871 x498 y2863 x481 y2859 x498 y2835 x514 y2837 x536 y2826 x539 y2801 x509 y2786 x482 y2794 x480 y2784 x497 y2776 x480 y2743 x464 y2734 x433 y2740 x450 y2716 x407 y2736 x343 y2744 x296 y2750 x256 y2763 x213 y2738 x196 y2702 x162 y2640 x219 y2604 x232 y2575 x279 y2518 x336 y2479 x375 y2473 x396 y2477 x408 y2459 x451 y2440 x473 y2425 x511 y2422 x538 y2423 x552 y2405 x601 y2402 x642 y2401 x676 y2408 x701 y2424 x730 y2424 x781 y2435 x812 y2450 x855 y2467 x906 y2504 x905 y2534 x933 y2562 x944 y2589 x979 y2613 x998 y2651 x1045 y2651 x1068 y2641 x1102 y2640 x1116 y2648 x1186 y2652 x1227 y2656 x1242 y2664 x1298 y2671 x1325 y2689 x1343 y2706 x1389 y2675 x1406 y2679 x1418 y2674 x1438 y2683 x1512 y2686 x1532 y2689 x1539 y2723 x1528 y2753 x1511 y2772 x1539 y2781 x1542 y2826 x1571 y2849 x1567 y2867 x1584 y2861 x1650 y2847 x1697 y2853 x1739 y2853 x1759 y2875 x1784 y2883 x1785 y2962 x1809 y2975 x1799 y3019 x1782 y3031 x1852 y3009 x1885 y3037 x1911 y3035 x1973 y2693 x1940 y2462 x1899 y2445 x1856 y2452 x1818 y2443 x1782 y2441 x1749 y2411 x1720 y2393 x1677 y2350 x1650 y2304 x1627 y2273 x1615 y2236 x1631 y2205 x1650 y2167 x1672 y2131 x1692 y2078 x1756 y2032 x1854 y1975 x1970 y1944 x2066 y1917 x2130 y1911 x2231 y1948 x2317 y1958 x2407 y2003 x2467 y2047 x2509 y2120 x2556 y2227 x2503 y2335 x2479 y2366 x2301 y2434 x2259 y2426 x2212 y2473 x2176 y2592 x2147 y2793 x2137 y2901 x2149 y3001 x2161 y3065 x2167 y3094 x2237 y3058 x2259 y3028 x2293 y3028 x2333 y3018 x2368 y3001 x2367 y2973 x2406 y2867 x2452 y2848 x2504 y2827 x2571 y2786 x2574 y2604 x2583 y2594 x2605 y2593 x2608 y2503 x2659 y2494 x2707 y2524 x2734 y2617 x2745 y2668 x2808 y2683 x2853 y2700 x2863 y2719 x2879 y2712 x2859 y2677 x2885 y2659 x2906 y2634 x2945 y2587 x2972 y2570 x2969 y2554 x2984 y2528 x2951 y2497 x3011 y2449 x3029 y2419 x3068 y2410 x3083 y2413 x3088 y2420 x3132 y2430 x3166 y2474 x3198 y2471 x3218 y2487 x3269 y2485 x3283 y2472 x3285 y2441 x3307 y2422 x3371 y2426 x3382 y2436 x3414 y2439 x3470 y2442 x3504 y2444 x3508 y2362 x3510 y2294 x3456 y2235 x3413 y2225 x3323 y2227 x3314 y2241 x3296 y2307 x3280 y2400 x3212 y2428 x3085 y2403 x3106 y2335 x3088 y2337 x3067 y2277 x2994 y2272 x2982 y2277 x2870 y2211 x2781 y2224 x2764 y2157 x2781 y2068 x2801 y1962 x2805 y1794 x2826 y1734 x2885 y1647 x2903 y1602 x2939 y1531 x2948 y1505 x2968 y1456 x3038 y1378 x3147 y1354 x3170 y1305 x3193 y1288 x3220 y1285 x3306 y1253 x3377 y1220 x3466 y1229 x3535 y1184 x3597 y1187 x3641 y1175 x3731 y1178 x3778 y1185 x3793 y1213 x3850 y1229 x3894 y1211 x3961 y1238 x4015 y1263 x4067 y1286 x4178 y1301 x4214 y1327 x4234 y1395 x4269 y1391 x4290 y1435 x4335 y1405 x4350 y1474 x4366 y1446 x4383 y1450 x4408 y1484 x4424 y1464 x4455 y1502 x4466 y1477 x4473 y1497 x4496 y1512 x4511 y1521 x4464 y1563 x4486 y1564 x4595 y1528 x4602 y1536 x4466 y1600 x4607 y1588 x4587 y1620 x4559 y1630 x4583 y1655 x4599 y1696 x4624 y1753 x4598 y1804 x4660 y1889 x4607 y1918 x4599 y1934 x4572 y1950 x4581 y2008 x4597 y2041 x4660 y2093 x4603 y2127 x4497 y2138 x4444 y2166 x4427 y2185 x4316 y2199 x4332 y2149 x4246 y2227 x4201 y2234 x3972 y2171 x3918 y2160 x3863 y2161 x3787 y2187 x3738 y2240 x3719 y2265 x3732 y2373 x3814 y2375 x3861 y2393 x3932 y2389 x4008 y2413 x4017 y2429 x4073 y2482 x4099 y2560 x4133 y2672 x4221 y2665 x4297 y2712 x4368 y2760 x4395 y2808 x4499 y2924 x4546 y2956 x4597 y2946 x4679 y2955 x4766 y2980 x4800 y2946 x4873 y2956 x4975 y2938 x5082 y2873 x5124 y2860 x5306 y2905 x5294 y2852 x5317 y2841 x5390 y2845 x5435 y2849 x5454 y2871 x5453 y2881 x5540 y2886 x5553 y2898 x5590 y2921 x5601 y2934 x5592 y2950 x5614 y2956 x5612 y3739 x2 y3739



m i1 m79

c n0 N0 x1017 y1073 X1218 Y1403 t2
# Control Point No 1: 66.7891
c n0 N0 x1018 y1320 X1160 Y1557 t2
# Control Point No 2: 46.7105
c n0 N0 x1019 y1718 X1275 Y2173 t2
# Control Point No 3: 41.4018
c n0 N0 x11 y982 X194 Y1200 t2
# Control Point No 4: 25.485
c n0 N0 x1134 y1709 X1295 Y1997 t2
# Control Point No 5: 37.8041
c n0 N0 x114 y162 X384 Y533 t2
# Control Point No 6: 36.9701
c n0 N0 x1236 y922 X1423 Y1255 t2
# Control Point No 7: 72.1867
c n0 N0 x1249 y1707 X1412 Y1996 t2
# Control Point No 8: 41.049
c n0 N0 x1274 y216 X1501 Y662 t2
# Control Point No 9: 53.1733
c n0 N0 x13 y743 X211 Y985 t2
# Control Point No 10: 27.702
c n0 N0 x1326 y1986 X1509 Y2337 t2
# Control Point No 11: 3.8616
c n0 N0 x1327 y1918 X1507 Y2265 t2
# Control Point No 12: 9.4381
c n0 N0 x1338 y611 X1544 Y1003 t2
# Control Point No 13: 70.0117
c n0 N0 x1368 y32 X1658 Y644 t2
# Control Point No 14: 62.647
c n0 N0 x1372 y3 X1447 Y159 t2
# Control Point No 15: 11.6053
c n0 N0 x138 y8 X418 Y394 t2
# Control Point No 16: 34.9218
c n0 N0 x14 y483 X219 Y738 t2
# Control Point No 17: 26.9703
c n0 N0 x1467 y2555 X1502 Y2636 t2
# Control Point No 18: 17.8677
c n0 N0 x1511 y5 X1772 Y581 t2
# Control Point No 19: 49.4695
c n0 N0 x1628 y1722 X1717 Y1895 t2
# Control Point No 20: 37.6317
c n0 N0 x1649 y993 X1809 Y1306 t2
# Control Point No 21: 83.72
c n0 N0 x1679 y2 X1803 Y312 t2
# Control Point No 22: 21.0356
c n0 N0 x1733 y1711 X1815 Y1897 t2
# Control Point No 23: 1387.5265
c n0 N0 x1748 y2643 X1823 Y2827 t2
# Control Point No 24: 66.3012
c n0 N0 x1783 y2489 X1806 Y2541 t2
# Control Point No 25: 17.0875
c n0 N0 x1853 y1141 X1969 Y1393 t2
# Control Point No 26: 989.8637
c n0 N0 x1879 y1707 X1934 Y1828 t2
# Control Point No 27: 21.8917
c n0 N0 x1880 y936 X2120 Y1464 t2
# Control Point No 28: 1087.3566
c n0 N0 x1895 y290 X2095 Y772 t2
# Control Point No 29: 37.3066
c n0 N0 x20 y1843 X251 Y2146 t2
# Control Point No 30: 18.1911
c n0 N0 x2039 y8 X2225 Y532 t2
# Control Point No 31: 13.7051
c n0 N0 x2079 y587 X2214 Y925 t2
# Control Point No 32: 31.9041
c n0 N0 x2133 y868 X2229 Y1106 t2
# Control Point No 33: 568.8357
c n0 N0 x2145 y1311 X2279 Y1610 t2
# Control Point No 34: 1027.5864
c n0 N0 x2168 y13 X2310 Y443 t2
# Control Point No 35: 2.6588
c n0 N0 x2244 y2562 X2342 Y2785 t2
# Control Point No 36: 90.8212
c n0 N0 x2285 y5 X2366 Y264 t2
# Control Point No 37: 3.4633
c n0 N0 x2317 y891 X2483 Y1308 t2
# Control Point No 38: 1314.0755
c n0 N0 x2330 y1724 X2458 Y2009 t2
# Control Point No 39: 0
c n0 N0 x24 y559 X179 Y751 t2
# Control Point No 40: 20.5873
c n0 N0 x240 y9 X473 Y339 t2
# Control Point No 41: 29.7303
c n0 N0 x2463 y1 X2574 Y394 t2
# Control Point No 42: 17.4777
c n0 N0 x25 y539 X212 Y775 t2
# Control Point No 43: 25.6789
c n0 N0 x2501 y1702 X2641 Y2014 t2
# Control Point No 44: 0
c n0 N0 x2530 y454 X2628 Y748 t2
# Control Point No 45: 24.0594
c n0 N0 x2572 y1304 X2667 Y1538 t2
# Control Point No 46: 0
c n0 N0 x261 y1707 X372 Y1860 t2
# Control Point No 47: 14.2532
c n0 N0 x2620 y187 X2749 Y629 t2
# Control Point No 48: 42.6408
c n0 N0 x2637 y1075 X2754 Y1359 t2
# Control Point No 49: 0
c n0 N0 x2642 y2262 X2732 Y2445 t2
# Control Point No 50: 0
c n0 N0 x2703 y872 X2788 Y1104 t2
# Control Point No 51: 1438.9876
c n0 N0 x2706 y6 X2810 Y410 t2
# Control Point No 52: 36.7211
c n0 N0 x272 y898 X582 Y1311 t2
# Control Point No 53: 56.4147
c n0 N0 x2789 y855 X2857 Y1039 t2
# Control Point No 54: 1377.6614
c n0 N0 x2825 y857 X2861 Y953 t2
# Control Point No 55: 29.5216
c n0 N0 x2875 y4 X2948 Y315 t2
# Control Point No 56: 33.9255
c n0 N0 x2881 y103 X3005 Y595 t2
# Control Point No 57: 69.2645
c n0 N0 x289 y328 X611 Y788 t2
# Control Point No 58: 54.166
c n0 N0 x293 y127 X636 Y617 t2
# Control Point No 59: 51.2877
c n0 N0 x2970 y5 X3071 Y444 t2
# Control Point No 60: 58.0461
c n0 N0 x3077 y5 X3178 Y479 t2
# Control Point No 61: 68.0532
c n0 N0 x3126 y19 X3220 Y444 t2
# Control Point No 62: 63.8177
c n0 N0 x3171 y7 X3248 Y380 t2
# Control Point No 63: 53.9028
c n0 N0 x3186 y857 X3236 Y1023 t2
# Control Point No 64: 814.593
c n0 N0 x3226 y674 X3335 Y1024 t2
# Control Point No 65: 862.2666
c n0 N0 x3257 y425 X3400 Y939 t2
# Control Point No 66: 129.9492
c n0 N0 x3367 y11 X3438 Y412 t2
# Control Point No 67: 60.9155
c n0 N0 x341 y1150 X535 Y1421 t2
# Control Point No 68: 37.3911
c n0 N0 x3478 y6 X3544 Y405 t2
# Control Point No 69: 60.6316
c n0 N0 x3522 y4 X3570 Y307 t2
# Control Point No 70: 44.2155
c n0 N0 x3557 y518 X3653 Y884 t2
# Control Point No 71: 83.4387
c n0 N0 x3583 y856 X3644 Y1053 t2
# Control Point No 72: 51.1446
c n0 N0 x3592 y6 X3643 Y336 t2
# Control Point No 73: 48.6417
c n0 N0 x3698 y47 X3760 Y413 t2
# Control Point No 74: 56.6093
c n0 N0 x3751 y473 X3839 Y829 t2
# Control Point No 75: 69.6925
c n0 N0 x3794 y904 X3839 Y1033 t2
# Control Point No 76: 27.441
c n0 N0 x384 y569 X588 Y850 t2
# Control Point No 77: 35.2229
c n0 N0 x3857 y872 X3931 Y1080 t2
# Control Point No 78: 40.1394
c n0 N0 x3876 y35 X3934 Y425 t2
# Control Point No 79: 56.3873
c n0 N0 x3880 y2180 X4014 Y2387 t2
# Control Point No 80: 36.8768
c n0 N0 x393 y1831 X558 Y2079 t2
# Control Point No 81: 18.0791
c n0 N0 x3948 y855 X4040 Y1111 t2
# Control Point No 82: 43.3296
c n0 N0 x3957 y300 X4029 Y665 t2
# Control Point No 83: 57.8196
c n0 N0 x4 y2299 X115 Y2462 t2
# Control Point No 84: 0.908
c n0 N0 x4015 y2199 X4175 Y2429 t2
# Control Point No 85: 35.4218
c n0 N0 x402 y1376 X588 Y1647 t2
# Control Point No 86: 35.5152
c n0 N0 x4025 y17 X4066 Y346 t2
# Control Point No 87: 43.4204
c n0 N0 x4059 y860 X4179 Y1178 t2
# Control Point No 88: 44.7165
c n0 N0 x4116 y13 X4135 Y171 t2
# Control Point No 89: 19.6382
c n0 N0 x4195 y474 X4261 Y736 t2
# Control Point No 90: 36.8665
c n0 N0 x4209 y41 X4231 Y239 t2
# Control Point No 91: 23.851
c n0 N0 x4237 y866 X4436 Y1319 t2
# Control Point No 92: 44.0108
c n0 N0 x4272 y167 X4307 Y402 t2
# Control Point No 93: 29.1951
c n0 N0 x4308 y860 X4431 Y1153 t2
# Control Point No 94: 30.6111
c n0 N0 x4343 y856 X4471 Y1177 t2
# Control Point No 95: 31.1785
c n0 N0 x4353 y468 X4433 Y776 t2
# Control Point No 96: 37.6142
c n0 N0 x4372 y13 X4408 Y308 t2
# Control Point No 97: 33.3828
c n0 N0 x4391 y372 X4467 Y681 t2
# Control Point No 98: 37.2399
c n0 N0 x4439 y2201 X4572 Y2362 t2
# Control Point No 99: 17.3478
c n0 N0 x4454 y4 X4504 Y385 t2
# Control Point No 100: 41.5764
c n0 N0 x446 y912 X647 Y1184 t2
# Control Point No 101: 38.8603
c n0 N0 x4485 y901 X4553 Y1051 t2
# Control Point No 102: 13.6817
c n0 N0 x4563 y342 X4599 Y515 t2
# Control Point No 103: 18.5307
c n0 N0 x4579 y1167 X4709 Y1390 t2
# Control Point No 104: 8.6187
c n0 N0 x4606 y33 X4633 Y253 t2
# Control Point No 105: 22.1103
c n0 N0 x4619 y888 X4775 Y1213 t2
# Control Point No 106: 21.0457
c n0 N0 x4651 y1 X4661 Y121 t2
# Control Point No 107: 11.4151
c n0 N0 x4677 y463 X4754 Y721 t2
# Control Point No 108: 24.6222
c n0 N0 x4685 y3 X4726 Y339 t2
# Control Point No 109: 32.0787
c n0 N0 x4709 y946 X4864 Y1233 t2
# Control Point No 110: 15.5012
c n0 N0 x4731 y533 X4798 Y746 t2
# Control Point No 111: 19.0945
c n0 N0 x4737 y769 X4863 Y1044 t2
# Control Point No 112: 19.5716
c n0 N0 x4741 y1516 X4874 Y1697 t2
# Control Point No 113: 3.5406
c n0 N0 x4749 y271 X4784 Y426 t2
# Control Point No 114: 14.9744
c n0 N0 x4750 y2558 X4934 Y2742 t2
# Control Point No 115: 15.1281
c n0 N0 x4755 y2210 X4970 Y2441 t2
# Control Point No 116: 19.6771
c n0 N0 x4773 y2 X4784 Y123 t2
# Control Point No 117: 10.8906
c n0 N0 x4796 y190 X4818 Y332 t2
# Control Point No 118: 12.9627
c n0 N0 x48 y246 X480 Y820 t2
# Control Point No 119: 62.4403
c n0 N0 x4839 y5 X4848 Y119 t2
# Control Point No 120: 9.8191
c n0 N0 x4887 y4 X4891 Y60 t2
# Control Point No 121: 4.6879
c n0 N0 x4895 y13 X4901 Y94 t2
# Control Point No 122: 6.7557
c n0 N0 x4912 y2005 X5235 Y2332 t2
# Control Point No 123: 22.5185
c n0 N0 x4924 y251 X4964 Y443 t2
# Control Point No 124: 16.1508
c n0 N0 x4954 y1433 X5087 Y1604 t2
# Control Point No 125: 1.8161
c n0 N0 x4972 y217 X5023 Y442 t2
# Control Point No 126: 18.5278
c n0 N0 x4988 y712 X5132 Y1018 t2
# Control Point No 127: 17.2926
c n0 N0 x5 y1344 X206 Y1598 t2
# Control Point No 128: 27.7558
c n0 N0 x5009 y2565 X5220 Y2760 t2
# Control Point No 129: 13.9014
c n0 N0 x5062 y7 X5098 Y249 t2
# Control Point No 130: 19.0199
c n0 N0 x5176 y1365 X5381 Y1600 t2
# Control Point No 131: 2.3397
c n0 N0 x5185 y875 X5254 Y997 t2
# Control Point No 132: 5.2626
c n0 N0 x5189 y2019 X5527 Y2315 t2
# Control Point No 133: 17.355
c n0 N0 x5207 y1717 X5419 Y1926 t2
# Control Point No 134: 8.4561
c n0 N0 x5232 y40 X5274 Y306 t2
# Control Point No 135: 18.6519
c n0 N0 x5257 y585 X5413 Y908 t2
# Control Point No 136: 16.2529
c n0 N0 x5312 y1242 X5484 Y1442 t2
# Control Point No 137: 0.2865
c n0 N0 x5322 y2559 X5499 Y2717 t2
# Control Point No 138: 10.0634
c n0 N0 x5344 y2287 X5538 Y2450 t2
# Control Point No 139: 9.9558
c n0 N0 x5393 y1710 X5439 Y1763 t2
# Control Point No 140: 1.7432
c n0 N0 x5436 y13 X5515 Y376 t2
# Control Point No 141: 22.5915
c n0 N0 x5442 y1193 X5542 Y1322 t2
# Control Point No 142: 0.8645
c n0 N0 x5524 y4 X5560 Y232 t2
# Control Point No 143: 13.6123
c n0 N0 x570 y1772 X829 Y2178 t2
# Control Point No 144: 29.393
c n0 N0 x6 y1385 X208 Y1640 t2
# Control Point No 145: 27.2651
c n0 N0 x61 y2555 X133 Y2667 t2
# Control Point No 146: 3.3228
c n0 N0 x644 y259 X949 Y739 t2
# Control Point No 147: 58.9616
c n0 N0 x689 y107 X1019 Y651 t2
# Control Point No 148: 62.4234
c n0 N0 x715 y1049 X964 Y1440 t2
# Control Point No 149: 67.5444
c n0 N0 x725 y2213 X803 Y2352 t2
# Control Point No 150: 0.1547
c n0 N0 x743 y1703 X925 Y1990 t2
# Control Point No 151: 30.7454
c n0 N0 x763 y19 X1038 Y488 t2
# Control Point No 152: 48.6502
c n0 N0 x791 y178 X1150 Y783 t2
# Control Point No 153: 76.3519
c n0 N0 x8 y899 X112 Y1028 t2
# Control Point No 154: 14.9088
c n0 N0 x847 y1704 X1060 Y2055 t2
# Control Point No 155: 36.7964
c n0 N0 x860 y864 X1032 Y1136 t2
# Control Point No 156: 46.9428
c n0 N0 x864 y479 X1125 Y917 t2
# Control Point No 157: 65.7093
c n0 N0 x904 y121 X1210 Y655 t2
# Control Point No 158: 62.0607
c n0 N0 x924 y33 X1253 Y621 t2
# Control Point No 159: 64.9474
c n0 N0 x927 y659 X1170 Y1061 t2
# Control Point No 160: 67.5546
c n0 N0 x984 y4 X1261 Y514 t2
# Control Point No 161: 52.7922
v p0 r0 b

Thanks,
Fortuna

maxlyons
Posts: 3649
Joined: Fri Jun 20, 2003 8:55 pm
Location: USA
Contact:

Re: Star tracer: black output file

Post by maxlyons » Fri Jun 15, 2012 7:24 pm

Fortuna wrote:okay, I will try to draw more lines in the meantime.
I don't think a lack of lines is the problem, and I think that it won't help.
Do you mean this?
Yes. It is clear from the project file that the optimizer has "solved" your project with a nonsense result. That usually happens because of bad input data which is used by the optimizer as a "starting point" from which to "solve" the project. A bad starting point usually leads to an incorrect solution. Bad input data is typically one (or more) of the following: incorrect field-of-view, incorrect lens projection, or incorrectly drawn line. I can't tell what has happened here, but my guess is that at least one of the lines is probably bad (perhaps connecting the ends of two different star trails).

It might be easiest to start again and add only a few lines (say 8-10 at first), and see if you can get a reasonable optimization result. After that you can add some more lines to get a more precisely optimized result. I also recommend not optimizing field-of-view. Or, only doing so as a last step and paying attention to make sure that the optimized value for FOV isn't unreasonable.

I hope this helps.

Max

Fortuna
Posts: 5
Joined: Tue Aug 02, 2011 10:29 am

Re: Star tracer: black output file

Post by Fortuna » Thu Jun 21, 2012 2:38 am

thanks for your feedback - I will give it a new try :)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest